Captures of the Nobels ODR-1 Nashville Style Overdrive!
This ToneX pack was captured using ADVANCED Training settings. This is done to ensure the most accurate representation of the pedal is captured.
- Each preset is noted by a number that specifies it's given level. I.E. preset marked "G1" will be low gain; "G3" will be higher gain. The recommended Input Trim is +12dB - +15dB.
"BC" Represents the Bass Cut setting.
Pack Includes 8 Presets:
DPE ODR-1 - G1
DPE ODR-1 - G1 - BC
DPE ODR-1 - G2
DPE ODR-1 - G2 - BC
DPE ODR-1 - G3
DPE ODR-1 - G3 - BC
DPE ODR-1 - G4
DPE ODR-1 - G4 - BC
Nobels ODR-1 - ToneX
Gain -
ToneX can make adjustments to the Gain settings, however you may notice some changes in the overall "fullness" of the preset.
EQ -
one settings are usually not included as the ToneX can match almost every tweaked setting from basic tone controls. Tone changes that create drastic changes will be noted in the preset title.
Pedal Captures -
These are captures of Boost/Overdrive/Distortion/Fuzz pedals only, not of an actual amp. These are not designed to run as an amp at the end of the signal chain, but used as a traditional pedal before the amp. These captures give an EXTREMELY economical option to test and have some pedals that cost us upwards of $1,000.
Presets -
It is recommended to run ToneX Input Trim between +10dB & +15dB. This will give the truest representation of the gain structure captured.
Firmware & Software -
It is good practice to ensure your firmware & software is up to date from the most recent version across all ToneX devices.